UP Plus 2

UP Plus 2 User Manual
Please download the latest manual for your UP Plus 2 3D printer below.
Thu, 5 Nov, 2015 at 4:46 PM
How to assemble the UP print head
The UP extruder heads come in different versions. In the photos attached you can see the version 3 extruder head assembly. Note: there is a small bl...
Tue, 11 Nov, 2014 at 7:39 AM
Sensor Error
If you have encountered this error, try the following:  Ensure you are using UP 2.x software or greater. Do a ROM update (even if your current versio...
Wed, 28 Oct, 2015 at 5:01 PM
Dry bearings [Plus/Plus 2]
If you have had your printer for a while you may find that the linear bearings have become dry. The linear bearings are the 'tracks' that the resp...
Wed, 25 Jun, 2014 at 2:42 PM
How to replace the extruder ribbon cable [Plus]
Before you order a new cable to replace please check which version you need.  Depending on the printer you have you will need a particular version o...
Tue, 27 Jan, 2015 at 9:43 AM
UPdates for UP Plus 2
500g / 1KG filament spool holder for the UP Plus 2 Download Alternate spool holder designed by K. Gribble Download Locking clip to secure yo...
Thu, 7 Jul, 2016 at 11:15 AM
UPgrade for UP Plus/2
Below is a list of manuals with instructions on how to upgrade parts on your UP 3D printer. How to add the new WiFi CPU Upgrades: READ ME first : Ov...
Fri, 7 Apr, 2017 at 3:39 PM
Getting Started - First print
Once you have set up your printer for your first print, please download the Stanford Bunny to test in your new 3D Printer. The best settings to use ...
Mon, 17 Jul, 2017 at 12:37 PM